Analysis of far-infrared laser magnetic resonance spectra of CH2Br at 447.3 and 671.1μm

A simple model has been developed to describe the Zeeman patterns of far-infrared laser magnetic resonance spectra of the monobromomethyl radical CH₂Br observed at 447.3 and 671.1μm. A satisfactory agreement between the experimental spectra of the radical and their simulation with this simple model has been achieved. This approach can be used to gain further information about the structure and the spectrum of this interesting radical.     

Near-barrier fusion reactions induced by α on197Au,193Ir,191Ir,185Re,181Ta,121Sb and69Ga nuclei

Fusion-evaporation cross-sections for the α-induced reactions upon¹⁹⁷Au,¹⁹³Ir,¹⁹¹Ir,¹⁸⁵Re,¹⁸¹Ta,¹²¹Sb and⁶⁹Ga nuclei at bombarding energies near the Coulomb barrier have been measured by off-line observation of the γ-rays emitted in the radioactive decay of the residual nuclei using stacked foil technique. The total fusion cross-section for the systems have been compared with simple statistical model calculations using the code ALICE/91 as well as with the coupled channel calculations that include the β₂ and ν₄ slatic deformations and dynamic couplings of the vibrational/rotational states of the target and the projet tile using the code CCDEF.     

Outflow refreshment angiography: A bright blood, bright static tissue technique

A new “bright blood” strategy, outflow refreshment imaging, is introduced in which a number of overlapping slices are excited in rapid succession. Flowing spins that refresh each overlapped slice portion contribute a bright signal. Additionally, static tissue in each non-overlapped slice portion also yields a bright signal. However, the flow/static contrast is comparable to that produced in inflow refreshment images, and angiograms can be generated by conventional maximum intensity projection processing. The dual ability to visualize angiograms and static tissue images is a major benefit of the strategy. Computer simulations of flow sensitivities and in vivo results are presented which compare the outflow and inflow refreshment imaging strategies.     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Chalcogenide based all-solid-state thin electroplated ion-selective membrane for Hg(II) flow-injection determinations

The response to Hg(II) of a thin all-solid-state Te-doped silver chalcogenide membrane, described by the general formula Ag₂ + δSe_{1 − x}Te_x, which has been electrochemically prepared following a previously proposed approach, has been investigated. The kinetics of formation of the membrane's secondary dynamic response to Hg(II) has been successfully combined with the precise timing and transient signal, typical for flow-injection (FI) measurements, in developing a sensitive and reliable mercury FI detector. Under optimized stream conditions it exhibits a linear Nernstian response, with a double slope of the calibration graph of 59 mV dec⁻¹, over the mercury(II) concentration range 10⁻⁶ − 10⁻³ M, the typical sample throughput amounting to about 70 samples per hour. The observed chemical amplification of the signal is due to the specificity of the processes dominating the initial step in formation of the steady-state signal of the membrane to mercury. The analytical performance of the Hg(II) FI detector, as regards sensitivity, reproducibility, selectivity and long-term stability has been thoroughly investigated. The exact procedure for membrane electrodeposition is given and the potential of the proposed approach as a cost-effective way for preparing chalcogenides of unique structure and properties has been outlined in the above context.     

Reaction of D2 with palladium fulleride C60Pd4.9

Fullerene deuteride was obtained by the reaction of deuterium with solid palladium fulleride C₆₀Pd_4.9 under fairly mild conditions. The compound was identified by FD-MS, UV-Vis and IR spectroscopies, and TLC.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 483–484, February, 1996     

Stationary Distribution Function Estimation for Ergodic Diffusion Process

The problem of nonparametric stationary distribution function estimation by the observations of an ergodic diffusion process is considered. The local asymptotic minimax lower bound on the risk of all the estimators is found and it is proved that the empirical distribution function is asymptotically efficient in the sense of this bound.     

Miscible blends of modified poly(aryl ether ketones) with aromatic polyimides

The phase behavior of binary blends of poly(ether ether ketone) (PEEK), sulfonated PEEK, and sulfamidated PEEK with aromatic polyimides is reported. PEEK was determined to be immiscible with a poly(amide imide) (TORLON 4000T). Blends of sulfonated and sulfamidated PEEK with this poly(amide imide), however, are reported here to be miscible in all proportions. Blends of sulfonated PEEK and a poly(ether imide) (ULTEM 1000) are also reported to be miscible. Spectroscopic investigations of the intermolecular interactions suggest that formation of electron donoracceptor complexes between the sulfonated/sulfamidated phenylene rings of the PEEKs and the n-phenylene units of the polyimides are responsible for this miscibility. © 1993 John Wiley & Sons, Inc.     

Titanium nanocarbides: Synthesis and modeling

The present state of research on the production and modeling of nanostructures based on titanium carbide-a typical representative of an extensive class of carbides of d-and f-metals-is reviewed. Methods for the synthesis of various Ti-C nanostructures (molecular clusters, nanocrystallites, nanospheres, nanofibers, nanowires) are examined, and their morphology, atomic structure, and known physicochemical characteristics are described. Theoretical models of the atomic structure and properties of new types of nanostructures in the titanium-carbon system (endo-and exohedral titanofullerenes, “hybrid” structures based on carbon nanotubes, the so-called peapods, nanocables, and a number of others) and the prospects for their application as components of nanoceramics, hydrogen accumulators, materials for spintronics, etc. are discussed. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 43, No. 1, pp. 1–23, January–February, 2007.     

HPLC-MS/MS技术在中华绒螯蟹硝基呋喃类代谢物残留量检测中的应用

建立了中华绒螯蟹中硝基呋喃类代谢物残留量的液相色谱-串联质谱检测方法.取均质后的中华绒螯蟹可食部分样品,用盐酸水解组织中蛋白结合代谢物,经2-硝基苯甲醛37℃过夜衍生化,调节pH值至约7.0～7.4后,用乙酸乙酯提取,正己烷净化.选用电喷雾离子源,在正离子、多反应监测方式模式下进行定性,以同位素内标法进行定量.方法的检出限为0.5 μg·kg-1,工作曲线的线性范围为1.25～50.0 μg·L-1.在添加浓度为0.5～10.0 μg·kg-1的范围内,AMOZ、SEM、AHD和AOZ的回收率分别在92.8%～106%、84.5%～94.6%、80.6%～98.6%和88.4%～105%之间,相对标准偏差均小于10%.